Sunnyvale,
Calif., December 7, 2004 –– QualCore
Logic, an intellectual property (IP) and full-service,
mixed-signal application specific integrated circuit
(ASIC) realization company, today said it has added
two new intellectual property (IP) cores to its product
portfolio.
The
first is a digital Serial ATA Host Controller with
OCP Interface. The second is high-speed analog
dual serializer/deserializer (SerDes) core for SXGA/SXGA+/UXGA
application that utilizes a Low Voltage Differential
Signaling (LVDS) I/O. This core is used for
flat panel displays in laptop computers.
Both
cores are intended for use in system-on-chip (SoC)
designs. They have taped out and have been implemented
in silicon.
Support for Serial ATA with V9201OCP
QualCore
Logic’s V9201OCP is a synthesizable IP core
compliant with the Serial ATA 1.0a specifications.
This IP has a gate count of 60K, excluding memory.
The
core is reusable across different on-chip buses with
the help of standard bus wrappers. It is configured
through a basic Open Core Protocol (OCP) interface,
and can be configured to support OCP bus widths of
16, 32 and 64 bits.
Deliverables
include: fully synthesizable Verilog Register
Transfer Level (RTL) source code and synthesis scripts;
documentation; self-checking verification suite; and
optional scripts for Static Timing Analysis (STA)
and Design For Test (DFT).
Its
robust verification suite offers design teams a set
of exhaustive test cases, automatic vector checking
and log file generation, and automatic generation
of the verification suite, as defined by the design
team. Added features are Bus Functional Models
(BFMs) for Serial ATA 1.0a devices and OCP, Bus Monitor
for Serial ATA 1.0a protocol checking, scripts for
automated data checking and vector pass/fail/abort
reporting.
The
core is synchronous and scan friendly. It can
attain a fault coverage of 97% with Scan Insertion
and ATPG vectors.
QualCore Logic’s SerDes Core
QualCore
Logic’s low-power analog 170 MHz SerDes core
–– QCSD2-18T transmitter and QCSD3-18T
receiver –– is a pre-verified physical
layer interface designed for .18-micron technologies.
Delivered as two hard macros, it is used for flat
panel displays in laptop computers.
The
QCSD2-18T transmitter is designed to support single-link
transmissions between host and flat-panel display
SXGA+ resolutions, and dual link transmissions between
host and flat-panel display up to UXGA resolutions.
It converts 48 bits of CMOS data into an LVDS data
stream, and can be programmed for rising or falling
edge clocks through a dedicated pin. The QCSD3-18T
receiver includes an Rx section to convert LVDS data
streams back into 48 bits of CMOS data with falling
or rising edge clock.
In
single link using a transmit clock frequency of 135
MHz, data throughput is 472 Mbytes per second.
In dual link with a transmit clock frequency of 85
MHz, 48 bits of RGB data is transmitted at an effective
rate of 595 Mbps per LVDS channel. Using an
85 MHz clock, data throughput is 595 Mbytes per second.
QCSD3-18T includes a deserializer per link, a clock synthesis unit per link and a demultiplexer block.
Boundary
scan logic is included for ease in testing I/Os at
the chip or board level. Internal scan is provided
in the digital logic.
Availability
Both cores are available now for licensing. Pricing is available upon request.
For
more details, visit the QualCore Logic website located
at: http://www.qualcorelogic.com/
Or, contact its Sales Department at (408) 541-0730,
Ext. 205 or sales@qualcorelogic.com.
About QualCore Logic
QualCore Logic is the recognized leader of silicon-proven Analog, Mixed-signal and Digital intellectual property (IP) for system-on-chip (SoC) designs for the past 15 years. QualCore’s IP portfolio includes high performance PHYs (DDRs, SerDes etc.), ADCs, DACs, PLLs, DLLs, Special IO’s, Power Management Solutions and various Analog and Digital building blocks. With a large team of expert engineers, we provide best-in-class solutions in all the participating technology areas right from specification till GDSII. It operates design and support centers in Sunnyvale (California) and Hyderabad (India) with more than 50 design experts. Corporate headquarters is located at: 1289 Anvilwood Avenue, Sunnyvale, Calif. 94089. Telephone: (408) 541-0730. Facsimile: (408) 541-0740. Email: sales@qualcorelogic.com. Web Site: http://www.qualcorelogic.com/
###
QualCore Logic Inc. acknowledges trademarks or registered trademarks of other organizations for their respective products and services
|